Surge Protectors & Switches

RSH-50 Surge Protector

Product code # 96415

Designed to protect HVAC equipment from electrical surges. Protects from up to 50,000-amp single surges and up to 10,000-amp repetitive surges. Type 1 Device - can be mounted in any position. Recommended for Residential and Commercial Use, all single phase 120/240V VAC outside condensing units and indoor air handlers.

• Long-Lasting Gas Discharge
• Tube Technology
• TFMOV Technology (Thermally Fused Metal Oxide Varistor)
• Limited Lifetime Warranty
• Weather-Rated under NEMA 4
• Fits All Single-Phase Units
• UL 1449 Listed
• NEC's highest Short Circuit Current Rating (SCCR) @200kA
• RoHS Compliant

RSH-50 Surge Protector with Non-Fused Disconnect Box 60A

Product code # 96419

Wall mount installation of RSH-50. Recommended for Residential and Commercial Use, all single phase 120/240V VAC outside condensing units and indoor air handlers.

RSH-50 VRM Kit - Voltage Range Monitor

Product code # 96421

Protects equipment from electrical surges and voltage disturbances by utilizing safety thermal fusing and gas discharge tube surge protection technology, combined with the ability to monitor the line protecting equipment against over and under voltage conditions that can cause damage to circuit boards and motors. The unit is fully programmable to set the voltage cutoff range from 90V to 300V while storing up to 300 events. Recommended for Residential and Commercial Use, all single phase 120/240V HVACR Equipment (air conditioning, heat pumps, mini-split applications).

• Over-Under Voltage Cutoff Delay can be adjusted from 0.5 to 60 Seconds
• Load Restore Delay adjustable from 1 to 600 Seconds 120/240 Single Phase, 60 Amp Double Pole Capacity Relays (handles loads 15-60 Amps)
• Magnetic Latching Relays for maximum reliability
• Large easy to read LCD Digital Display
• Dual Red and Green LED Diagnostics Indicators
• Easy set-up, Field programmable, no laptop or programming tool required
• Stores up to 300 over/ under voltage and power-loss events in Resettable Internal Memory
• Non-volatile Memory retains all settings and event log when power is lost
• Universal 35mm Snap-on Din-Rail Receiver
• Snap-on Finger Guard Screw Terminal Covers
• Large Box Lugs for easy wire Insertion
• Entire Kit is NEMA 3R enclosure, with the VRM60 having NEMA 1 Din-Rail Housing

Safe-T-Switch Gen 3

Product code # 97085, 97086, 97087, 97088, 97089, 97090, 97091

Low-voltage condensate overflow cutoff switches are designed to detect clogged A/C condensate drains. The built-in, easy-access, hand-ratcheting float adjusts sensitivity without removing top cover. The model SC1 cleanout device features a Schrader valve connection to enable clearing blockages without removing top cover.

• Overflow switches (SS1, SS2 and SS3) detect clogged condensate drains and shut off system to prevent water damage, fulfilling IMC code 307.2.3.4
• Adjustable ratcheting float level can be easily adjusted without removing the cap
• Magnetic reed switch with solid float improves accuracy
• Inline cleanout devices (SS1 and SC1) provide quick and easy access for cleaning condensate drain lines using any method, fulfilling IMC code 307.2.5
• Included cleanout tool fits flush inside body and allows for clearing blockages at high pressure. Clips onto cap for easy storage
• All models also available in Plenum rated versions

Aqua Guard 1100+ Switch for Metal Pan

Product code # 96100

The AG-1100+ is incredibly easy to install. It can be mounted to the drain pan in 10 seconds or less. Installation does not require any pre-drilling for screws. The AG-1100+ incorporates a protective cover to keep out insulation and debris that could prevent the float from rising.

• High Capacity 5 Amp, 24Volt AC Magnetic Float Switch
• Easy, Drill-Free Installation
• Residential and Commercial Applications
• Pull Up Test Knob
• Protective Housing Keeps Out Insulation, Pests, and Debris
• Normally Open 3rd Wire for Optional External Alarm, Digital Controller, or Energy Management System
• US Patent 7,710,283
• UL 508 Approved

Aqua Guard 1200+ Switch for Metal & Plastic Secondary Drain Pans

Product code # 96106

The AG-1200+ has all of the features of the 1100+ plus an innovative two-piece clamp design which allows it to be mounted to a metal secondary drain pan (without a lip) or a plastic secondary drain pan (with a lip) in 10 seconds or less, without screws or drilling.